ROOKO振实密度测试仪的标准-参数-价格-中国粉体罐�/title>

具有设定振次和时间两种测量方式，具有定质量和定体积两种测试方法，设计参考人体工学，操作简�?参照USP＇�/span>美国药典（�/span>�?/span>BP＇�/span>英国药典（�/span>咋�/span>EP＇�/span>欧洲药典（�/span>的规范要求及GB/T31057.2-2018.

颗粒材料物理性能测试�?部分：振实密度的测量� GB/T5162-2006/ISO3953:1993＇�/span>金属粉末振实密度的测定），中的各项指标、�/span>

With set vibration times and time two measurement methods, The design accord with human body engineering, the operation is simple. Meet specification requirements of USP (the United States pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia) and GB/T 5162-5162 / ISO3953:1993 (metal powder the determination of tap density),

振实密度测试仪的标准

二、应用范围：Scope of application

适用于非金属粉、金属粉体、制药、化工、电池、磨料以及科研教学等领域＋�/span>

It is suitable for non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and research teaching etc field ,

振实密度测试仪的标准

工作原理� Working principle

将粉末量筒固定在机械振动装置上，振动电机带动机械振动装置上下振动，装有粉末的刻度量筒随机械振动装置而发生有节拍的振动，随着振动次数的增加，量筒里的粉末逐渐振实，振动次数达到设定的次数后，机械振动装置停止振动，读出刻度试管的体积，根据密度的定义：质量除以体积、从而求出振实后的粉末密度、�/span>

Powder cylinder fixed in the mechanical vibration device, mechanical vibration device vibrate under driven by vibrating motor, the calibration test tubes which containing powder vibrate with the mechanical vibration device, with the increase of vibration frequency, the powder in the measuring cylinder gradually compact by vibration, When vibration frequency reaching setting the number of times, mechanical vibration device will stop the vibration, Read the volume of the calibration test tube, according to the definition of density: mass divided by volume, thus find out the powder density after compaction.

�?各型号及参数描述model and parameter description

功能项目/型号 project/model	FZS4-4	FT-100B	FT-100A			FT-100CA
1测试工位�?/span> Test station number	1�?/span> one					2�?/span> two
2.测试数据处理方式 Test data processing method	人工计算 manual computation		带打�?自动计算 With print + automatic calculation
3.量筒（玻璃材质）定质量法使用Measuring	25ml�?00ml （选购10ml（�/span>	25ml�?0ml�?00ml�?50ml（选购10ml量筒用于25ml以下样品测试�?
4.密度density	0-9.9999g/cm3
5.测量模式measurement	振次和时间两种测量方弎�/span> Vibration and time			振次Vibration
6.振幅 range of vibration	整数1-14mm可调：�/span> Maximum 14mm, integer 1-14mm adjustable;
7.振动频率frequency	0｝�/span>300�?分（连续可调（�/span>times/ minute. (continuous adjustable)
8.振动时间	time of vibration0-9999S				旟�/span>
9.测试方法	定质量法（标配）；定体积法（选购不锈钢组合量筒部件）
10.定体积法组合量筒（选购（�/span>	配置不锈钢量筑�/span>25ml�?00ml；（或选购10ml量筒用于25ml以下样品测试�? 组合量筒由上套筒和标定体积量筒组�?
11.参照标准standards	USP�?/span>BP�?/span>EP药典的规范；GB/T5162-2006；ISO3953:1993；GB/T31057.2-2018.
12.量筒要求Measuring cylinder requirements	1.容积丹�/span>Volume25±0.5ml 允差为�?.25ml：�/span> 2.容积Volume100±1.0ml，允差为±0. 5ml：�/span> 3.容积Volume10±0.2ml，允差为±0.10ml 配置量筒盖，在振实过程中防粉体向外飞溅性溢�?
11．重复�?/span>repeatability	误差Deviation：≤1%
12.准确�?/span>Accuracy	误差Deviation：≤1%
13.测试方法的选择	定质量法适用于：不易粘在量筒上的粉体样品；定体积法适用于：容易粘在量筒上的超细粉体样品.
14.应用领域 Scope of application	非金属粉、金属粉、制药、化工、电池、磨料以及科研教学等粉体颗粒物料Non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and scientific research teaching and other powder particle materials
15.电源Power supply	交流Ac220V(50Hz/60Hz)�?0W
16.使用环境 Operational environment	湿度小于85%，无凝结现象，无烟尘，无机械振动源或电磁干扰溏�/span> Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source
17.其他选购项目 Buy items	a.3Q验证文件 b.隔音�?nbsp; c.水分�?nbsp; d.粉体真密度仪 e.松装密度�?/span> a.3Q verification file b. sound box c. moisture meter d. powder true density meter e. bulk density meter

�?振实密度试验所用量筒和样品量表

样品�?5ml以下时，建议选择容积�?0ml的量筑�/span>

量筒（组合量筒）容积/ml	试验样品质量/g	样品松装密度/（g/cm3（�/span>
25	100.0±0.5	>4
	50.0±0.2	2--4
	20.0±0.1	1--2
100	100.0±0.5	1--2
100	50.0±0.2	<1

�?部分粉体样品的振动次数的选择�?/span>

样品类型	振动次数/欠�/span>
咖啡类粉佒�/span>	300
药品类粉佒�/span>	500
奶粉类粉佒�/span>	625
工业颗粒（水泥、氧化铝粉等（�/span>	1000
金属类粉佒�/span>	3000
注：有其他要求时，由供需双方协商.