Main Features９�br/>主要特点９�br/> This process is applicable for most kinds of thermoplastic procductd with or without filling.As a water ring is formed outside the die set plate,the die set plate does not contact cooling water,which ensures homogeneous die set plate temperature.Even at very low output,the discharge from the die set can still remaineven and normal.The die set surface hot pelletizing system not only ensures saturated and good looking appearance of the material grains,it also makes the material grains enter the cooling water ring immediately after pelletizing－�br/> This equipment with simple process consists of pelletizer,dewatering maching,air conveying system and silo.Customers may add it with fluidizing bed and vibrating sieve or other equipment.The water ring hot face pelletizing system is available in both of vertical and horizontal line.
模面水环切粒适用于大多数的填充或不填充的热塑性物料产品，由于是在模板外围形成了水环，模板并不和冷却水接触，这一特性保证了模板温度的均匀性。这样即使产量很低，模板
出料依然非常均匀、正常。由于彩模面热切系统，不仅保证了物料颗粒的外观圆滑美观，而且由于粒料被切出后及时入冷却水环，从而使设备结构紧凑，减少了设备的占地空间、�br/> 该种工艺较为简洁的设备配置有：切料机、脱水机、风送系统及料仓。用户还可以根据工艺需要选配沸腾床。振动筛等设备。模面水环切粒系统包括立式水环切粒系统和卧式水环切粒系统、�br/>